 Marley Engineerd Products |
Product Description:
Used in offices, stores, schools, churches, hospitals, dormitories, airport terminals, reception rooms, entrance lobbies, corridors and stairways.
Basic cabinet can be mounted on the ceiling, floor or wall.
Heaters can be mounted on the surface, full recessed or semi-recessed.
Heater can be mounted for air discharge up or down or with the heater mounted on end the air can be discharged either left or right, to provide an air door affect.
Cabinet constructed of heavy 16 gauge cold-rolled steel structurally formed to provide strength and rigidity for normal heavy wear and usage. Cabinet is finished in Neutral Grey epoxy. (Decorator colors optional).
Nineteen capacities - 2kW to 32kW; five cabinet styles - 35'', 45'', 58'', 68'' and 78'' lengths (26-3/8'' height x 9-3/4'' deep).
1/8 hp, PSC, motors are two-speed (1550/1450 rpm).
Motors are resilient mounted with automatic thermal overload protection. Motor fuse protection is provided on all heaters to meet UL, cUL and NEC requirements.
Plate fin element - steel fins are copper brazed to low watt density, steel-sheathed tubular heating elements. (80/20NiCh resistance wire). Element is finished with aluminized paint for corrosion resistance. Fins and elements are arranged in a uniform grid pattern and fit closely into the discharge area to assure that all outgoing air passes through the heating element.
Thermal safety cutout - installed in direct contact with the heating element. Automatically shuts off the heater in the event of overheating due to any cause and reactivates the heater when operating temperature returns to normal.
Built-in thermostat - single pole, snap-action thermostat with remote bulb sensor located directly in the air intake. (Optional - built-in two stage thermostat available). Easy and low cost field installation of a completely packaged heater.
Automatic fan delay eliminates cold drafts on start-up and discharge residual heat from the heater body during shut down.
Many options available.
|
